Havalı kumlama makinası / Pneumatic Sandblasting Machine
- Ex Works (şirketten alım),
- Kurye teslimi
- In detail
(Haritada göstermek)
- MarkaSAYGILI MARKA
- Üretici ülkeTürkiye
TURKISH
Havali kumlama makinesi basinçli hava ile çalismaktadir. Makineye hava baglandiktan sonra temizlik islemi yapilmaktadir. Basinçli hava debisi ayarlanarak temizligin istenen düzeyde olmasi saglanir. Iyi bir temizlik için debisi 5 - 6 m3 / dk. olan kompresör uygundur. Makine tanki 220 - 230 lt. hacmindedir. Kumlama hortumu boyu uzun tutularak kumlama yapilabilecek alan artirilir. Havali kumlama makinesi seyyar olarak kullanilabilir. Makineyi çaistirmak için tank kum ile doldurulur. Daha sonra kum giris yeri lastik tampon ile kapatilir.
ENGLISH
It’s Working Principle
Pneumatic sandblasting machine is working with compressed air. After connecting the air to the machine, cleaning operation starts. By calibrating compressed airflow, appropriate cleaning level is arranged.
For a good cleaning, a comprssor about 5 – 6 m3 / min. flow is appropriate. The machine tank is about 220-230 lt. volume. With long sanding hose, big areas could be sandled. The pneumatic sandbastling machine can be used as portable. To start the machine the tank is filled with sand. The sand input part is closed with rubber pad. This means that the air pressure in the hose and in the tank would be equaled. By joining 2 stripped valve and the air, pressured sand goes outside.The nozzle always must be hold through the cleaning surface.
The sand that is seated to the tank must be dry. Wet or moistured sand can damage the machine. The nozzle is designed as portable. If there are big pieces in the sand it can damage the nozzle. In this case, the nozzle must be demounted and cleaned. For the sort of the sand, it can be used some times. The place that sandling performes must be a close area for the use of the sand again and again.
Areas to be used:
-
Rusted, steel construction, profiles, ship surfaces cleaning and preparing for coloring, forged steel cleaning, dump cleaning areas.
-
Iron,sheet, aluminium, glass material surfaces cleaning, decorative shaping purposes.
PNEUMATIC SANDBASTLING MACHINE TECHNICAL PROPERTIES
Machine Type |
SM-AIR |
Machine capacity lt. |
SM-AIR-220 |
pressure bar |
8 |
Machine height mm |
1500 |
Machine width mm |
1200 |
Diametre mm |
630 |
Machine weight kg. |
180 |
P.S.:According to the surface dirtiness, air compression and nozzle diameter conditions, 1-7 m2 area could be cleaned in one hour.