- BrandParsRos Material Testing Equipment
- Country of manufactureTurkey
Fully Automatic Sample Surface Abrasion Tester
PRODUCT CODE
PRS-KA1040 |
Automatic Sample Surface Abrasion Tester, 220-240 V, 50-60 Hz |
PRS-KA1042 |
Etching move, PRS-KA1040 and PRS-KA1035 to |
PRS-KA1043 |
Sample Rack, Ø 38 to 100 mm diameter for cylindrical specimens. |
PRS-KA1044 |
Water Retention Panel Set, PRS - KA 1040 and PRS - KA 1035 for Devices. |
PRS-KA1048 |
Water Retention Panel to Ø160mm cylindrical samples. PRS - KA 1040 and PRS - KA 1035 for Devices. |
STANDARDS
EN 12390-1, 12390-3, 12504-1; ASTM C 31, C39, C42, C192, C617
PRS-KA1040 Automatic Sample Surface Abrasion Tester, cylinder-shaped concrete samples (cut out the Artwork, including carotene), TS EN and ASTM standards used in the preparation for the strength test in accordance with pressure.
Cylindrical samples, pressure strength test for a fast, easy and accurate way of preparation is the parallelism of surface pressure to be applied and etching method that guarantees smoothness.
Sample size using appropriate sled and water retention panel, may erode or three cylindrical specimens of 150-160 mm diameter will be implemented in two test load the sample surface of the cylinder with a diameter of between 38 and 100 mm at the same time. Sample length should be at least 70 mm.
Pressure strength test to be applied, EN and ASTM standards in accordance with cylindrical specimens, the pressure of the surface to be applied for deviations from the plains up to 0.05 mm, the side face of the lower and the deviation from squareness according to surface should be less than 0.50.
Etching time can be between 50 and 400 seconds by the user. Optimum grinding time, for an edge connected to the device sample cylinder is between 90 and 100 seconds.
cradle is connected to the sample moves fully automatic duplex. Occupational health and safety in the appropriate ergonomic design prevents user exposure to water and dust
Samples can be easily connected to the sled. Rack and water retention panel can easily be replaced without using any equipment.
Lockable wheels can be replaced easily with the aid.
airframe of the device to be lighter than aluminum, and the outer hair is made of stainless steel for corrosion resistance.
water retention panels for sample cubes or cylinders of different diameters must be ordered separately.
Automatic Sample Surface Abrasion Tester is supplied with the following.
- etching move
- Sample Rack, Ø 38 to 100 mm diameter for cylindrical specimens
- Water Retention Panel Kit
(Ø150mm, Ø100mm, Ø75mm and Ø50mm consists of 4 panels in accordance with the specimen like)
Dimensions |
730x1080x1510 mm |
Weight (approx) |
260 kg |
Power |
1850 W |